[Direct Use] Super MB Pro M6+ Full Version DoIP Benz with Latest SSD Plus Panasonic 8G FZ-G1 I5 3rd Generation Tablet

Product Description

Super MB Pro M6+ Full Version DoIP Benz with SSD Plus Panasonic 8G FZ-G1 I5 3rd Generation Tablet

1. With latest SSD 512G work for cars and trucks till 2024 year
2. Software installed already, easy operation, with the Panasonic Tablet Easy to Carry out and Stable for Working
3. Super MB Pro M6+ Full Version= MB Star Full Function+ BMW F+G Series Coding+ Other DoIP
4. Super mb pro m6+ 100% compatible with the original Mercedes-Benz software
5. Supports E-SYS,  Aicoder for BMW F and G series coding
6. Compatible with APP like, BMW BimmerCode, Bimmerlink, MHD, Bimmergeeks, XHP Flashtool, ODIS-e, XDelete, M Flasher, etc 
7. Can be used as a DoIP device for VAG
8. Support new models such as W223 c206 213 167.

SSD 512G Including

X-en-try/ D-A-S：2024.06
W-I-S：2021.07
E-P-C： 2018.11
PL76： 2022.01
SDmedia Offline： 2014.01
Starfinder 2022
Selit Service Literature：1.4
SWFinder：5.2
Vediamo and DTS Monaco


Second-hand Panasonic FZ-G1 I5 3rd generation Tablet 8G without Hard Disk
Note: Panasonic Tablet Second Hand, 90% New, Fully Functional. 

Basic Information:

Name: Desktop-1KA03JR
Operating system: Windows 10 Enterprise LTSC 64-bit(10.0, Build 19044)
Language: English
System Model:FZ-G1AAHJFLM
Processor: Intel(R)Core(TM)i5-3437U CPU @ 1.90GHZ(4 CPUs), ~2.4GHZ
Memory: 8192MB RAM



M6+ Connection Instructions




1. Connection between MB diagnostic software and hardware
 
(1) Connect the M6+ hardware box to the car diagnostic interface via the test line. The red indicator light ① on the host is always on, and the system indicator ② is flashing during startup. After startup, ② is always on and beeps once, indicating the startup is finished.

(2) Wired connection: Connect the USB port ⑦ of the M6+ hardware box to the USB port of the computer or tablet via a USB cable, and a new network connection will appear on the network management interface of the computer or tablet (WIN10 driver-free), and the IP address of the network connection property will be changed to 169.254.255.*, Subnet mask: 255.255.0.0, Preferred DNS: 169.254.255.255, click “Advanced”, add multiple IP addresses as 172.29.127.*, 255.255.0.0. After the computer or tablet is connected to the network, ④ the indicator light will be on.


(3) Wireless connection: You cannot find the wireless network by plugging in the USB cable. Unplug the USB cable from the M6+ hardware box port, and you will find an M6+ DOIP-**** network on the computer or tablet, just connect it. ⑤ The green light of the wireless indicator is always on, the wired light is off, no setting is required, and the password is 123456789.

(4) After opening the BEN software lock on the computer side, the original diagnostic test software can be used normally.

(5) For remote C-end operation, please consult us.

2. BWM software and hardware connection
 
(1) Connect the M6+ hardware box to the car diagnostic interface via the test line. The red indicator light ① on the host is always on, and the system indicator ② is flashing during startup. After startup, it is always on and beeps once, indicating the startup is finished.

(2) Wired connection: Connect the USB port of the M6+ hardware box to the USB port of the computer or tablet via a USB cable, and a new network connection will appear on the network management interface of the computer or tablet (WIN10 driver-free) and change the network connection attribute IP address to 172.29.127.* 255.255.255.0. Click “Advanced” and add a multi-IP address as 169.254.0.* 255.255.255.0. After the computer or tablet is connected to the network, the indicator light ④ will be always on. Press and hold the switch button ⑥ on the side for 3 seconds and then release it. You can see that the ④ green indicator light is always on and then flashing, indicating that the test can be performed normally. It will return to the initial state after it is powered on again.

(3)The wireless network can NOT be found by plugging in the USB cable. Unplug the USB cable from the M6+ hardware box port, and you will find an M6+ DOIP-**** network on the computer or tablet. You can connect without any settings, and the password is 123456789, ⑤The wireless indicator green light is always on, and ④The wired indicator is off. Press and hold the ⑥ switch button on the side for 3 seconds and release it, you can see ⑤the wireless green indicator light is always on and turns to flash, indicating that the test can be performed normally. It will return to the initial state after it is powered on again.

(4) The computer-side BWM software adopts a wired or wireless connection, and the mobile phone BWM APP software adopts a wireless connection.

(5) For remote C-end operation, please consult us.

3. For DOIP function and hardware connection of other diagnostic test software, please refer to BWM software and hardware connection method.

Panasonic FZ-G1 Configuration:

Name: Desktop-1KA03JR
Operating system: Windows 10 Enterprise LTSC 64-bit(10.0, Build 19044)
Language: English
System Model:FZ-G1AAHJFLM
Processor: Intel(R)Core(TM)i5-3437U CPU @ 1.90GHZ(4 CPUs), ~2.4GHZ
Memory: 8192MB RAM

Note: The tablet uses a SSD with mSATA interface.


Super MB PRO M6 + PCB Display









Package List:

1pc x SUPER MB PRO M6+ Host
1pc x OBD2 16pin Cable 
1pc x USB Cable
1pc x 38PIN Cable
1pc x 14PIN Cable
1pc x 4PIN Cable
1pc x SSD 512G
1pc x Second-hand Panasonic FZ-G1 I5 3rd generation Tablet 8G without Hard Disk
1pc x Charger

 

If you have any questions about the device, the price, or the payment, please feel free to contact us.

Contact Person: Elyza

Whatsapp: +86 13983755934

Telephone: +86 13983755934

Wechat: +86 13983755934

Official Email: Sales@obd2shop.co.uk

Skype: OBD2Tool.co.uk