X-431 TSGUN is a professional TPMS diagnostic tool that integrates TPMS sensor activation, reading, learning and programming. It can activate and read tire pressure sensor information through high or low radio frequency The X-431 TSGUN tire pressure gun is portable, powerful and easy to operate. It needs to work with Launch intelligent diagnostic tool to perform the tire pressure activation, programming, diagnosis and learning functions.
1. Launch X431 is a global leading brand, popular among customers, and worth trusting.
2. We are an Authorized Launch Dealer, Guarantee it is a 100% Original Launch machine.
3. All products have been passed the strict quality test before shipment, make sure high quality.
4. After-sale warranty: 1 year, we also offer lifetime tech support.
Check the latest user manual for X431 TSGUN
X-431 TSGUN TPMS WAND Features:
1. 1.77-inch color screen
2. Instantly read tire pressure, tire temperature, and battery status
3. Diagnose tire pressure faults, including read DTC, clear DTC, etc.
4. Activate and match all 315MHz or 433MHz sensors
5. Read, copy, and write the sensor ID quickly
6. Reprogram LAUNCH sensors with unlimited times
7. Built-in tire pressure learning instruction makes operation more easy
8. Cover 98% of global vehicles with a tire pressure system
X-431 TSGUN TPMS Language Supported:
English, French, Spanish, German, Russian, Korean, Japanese, Portuguese, Italian, Polish, Dutch, Hungarian, Finnish, Simplified, Czech, Turkish, Greek, Arabic, Danish Persian, Romanian, Serbian, Swedish, Chinese Traditional. Note: It cannot be used in North America
1. Tap TPMS on the Job menu of the diagnostic tool.
2. Tap Bind X-431 TSGUN to enter.
3. Tap Bind, the binding interface will pop up.
4. Enter the required information. After inputting, tap Bind. It will be displayed in the Bound list automatically.
( Repeat steps 3~4 to bind multiple X-431 TSGUN devices to the diagnostic tool.)
Working Principle
Below illustrates how the TSGUN works with the specific diagnostic tool.
Notes:
The diagnostic tool must be a specific scanner loaded with the TPMS module.
A stable communication should be established between the TSGUN and the diagnostic tool.
The available TPMS functions may vary with different vehicles.
When activating some special TPMS sensors, different methods may apply.
Getting Started
For initial use, please follow the flow chart below to start using it.
Notes:
1. When scanning the available TSGUN device, make sure it has been powered on. After searching, tap it to pair up via Bluetooth. If the firmware version of the TSGUN is too low, the system will automatically upgrade it.
2. For indirect TPMS vehicles, only the Learning function is supported. For vehicles using Direct TPMS, it generally includes Activation, Programming, Learning, and Diagnosis. The available TPMS functions may vary for different vehicles being serviced.
TPMS Operations
1. Activate Sensor
This function allows users to activate the TPMS sensor to view sensor data such as sensor ID, tire pressure, tire frequency, tire temperature, and battery condition.
For universal sensors, place the TSGUN alongside the valve stem, point toward the sensor location, and press the OK button. Once the sensor is successfully activated and decoded, TSGUN will vibrate slightly and the screen will display the sensor data.
Note:
For early magnet-activated sensors, place the magnet over the stem and then place the TSGUN alongside the valve stem.
If the TPMS sensor requires tire deflation (of the order of 10PSI), then deflate the tire and place the TSGUN alongside the stem while pressing the OK button.
2. Program Sensor
This function allows users to program the sensor data to the specific brand sensor and replace the faulty sensor with a low battery life or one that is not functioning.
There are three options available for programming the sensor: Auto Create, Manual Create, and Copy by Activation. Note: Do not place the device close to several sensors at the same time, or the diagnostic tool will detect more sensors, which may result in programming failure.
Method 1- Auto Create
This function is designed to program the specific brand sensor by applying random IDs created according to the test vehicle when it is unable to obtain the original sensor ID.
① Select the wheel that needs to be programmed on the diagnostic tool, place a sensor close to the TPMS antenna of the TSGUN, and tap Auto to create a new random sensor ID.
② Tap Program to write in the newly created sensor ID to the sensor.
Note: If Auto is selected, the TPMS Relearn operation needs to be performed after programming all required sensors.
Method 2 - Manual Create
This function allows users to manually enter sensor ID. Users can enter
the random ID or the original sensor ID, if it is available.
① Select the wheel that needs to be programmed on the diagnostic tool, place a sensor close to the TPMS antenna of the TSGUN, and tap Manual.
② Use the on-screen virtual keypad to input a random or original (if available) sensor ID and tap OK. Note: Do not enter the same ID for each sensor.
3. Follow the on-screen prompts to write in the sensor ID to the sensor
Note: If a random ID is entered, please perform the TPMS Relearn function after the programming is finished. If the original ID is entered, there is no need to perform Relearn function.
If a vehicle does not support the Learn function, please select the Manual option to enter the original sensor ID manually, or trigger the original sensor at the activation screen to get its information, before programming the sensor.
Method 3 - Copy By Activation
This function allows users to write in the retrieved original sensor data to the specific brand sensor. It is used after the original sensor is triggered.
① From the activation screen, select the specific wheel position and trigger the original sensor. After the information is retrieved, it will be displayed on the screen.
② Place a sensor close to the TPMS antenna of the TSGUN, and tap Replication (Copy by activation).
③ Tap program to write in the copied sensor data to the sensor.
Note: Once programmed with Replication, the sensor can be installed in the wheel directly to be mounted on the vehicle and the TPMS warning light will turn off.
3. TPMS Relearn
This function is used to write the newly programmed sensor IDs into the vehicle’s ECU for sensor recognition. Relearn operation applies only when the newly programmed sensor IDs are different from the original sensor IDs stored in the vehicle’s ECU. There are three ways available for Relearn: Static Learning, SelfLearning, and Relearn by OBD.
Method 1 - Static Learning
Static learning requires the vehicle to be put into learning/retraining mode, and then follow the on-screen prompts to complete it.
Method 2 - Self-Learning
For some vehicles, the learning function can be completed by driving. Refer to the on-screen learning steps to do the operation.
Method 3 - Relearn by OBD
This function allows the diagnostic tool to write the sensor IDs to the TPMS module.
To perform relearn by OBD, firstly activate all sensors, and then use the diagnostic tool together with the included VCI to complete the learning steps following the on-screen instructions.
Q: Why does my TSGUN always stay on the welcome screen? A: If the device keeps displaying the welcome screen, it indicates that it is not in TPMS function mode. If the diagnostic tool is performing the TPMS function, the device will switch to the corresponding function mode.
Q: Why is my TSGUN always displayed in English even though the system language of my diagnostic tool is set as non-English? A: The system language of the device varies with the system language of the diagnostic tool that binds it. Currently only English and simplified Chinese are available on the device.
If the device detects the system language of the diagnostic tool is non-Chinese, it will change to English automatically no matter which language the diagnostic tool is set as.
Q: My TSGUN does not respond to the diagnostic tool. A: In this case, please carefully check the following:
Whether the device is successfully bound to the diagnostic tool.
Whether the desired device is ticked in the Bound list.
Whether the device is powered on.
Whether the device is damaged or defective.
Q: Why does my TSGUN automatically power off? A: Please check the following:
Whether the device is fully discharged.
If the device is not being charged and there is no operation on the device for 30 minutes, it will automatically power off to conserve battery power.
Q: My TSGUN can not trigger one or more of the sensors. A: Please check the following:
Whether the device is damaged or defective.
Whether the sensor, module, or ECU itself may be damaged or defective.
The vehicle does not have a sensor even though a metal valve stem is present. Be aware of Schrader rubber-style snap-in stems used on TPMS systems.
Your device may require a firmware upgrade.
Q: What to do if my TSGUN encountered some unexpected bugs? A: In this case, a firmware upgrade is required. On the TPMS version selection screen, tap Firmware Update to upgrade it.
X-431 TSGUN TPMS WAND Specification:
Display: 1.77 inch color screen
Resolution: 168*128 Pixel
Batter: 3000 mAh
Input Voltage: DC 5V
Working Current: ≤1A
Working Temperature: -10℃~50℃
Storage Temperature: -20℃~60℃
X-431 TSGUN TPMS WAND Package list:
1 pc x X-431 TSGUN
1 pc x USB cable
1 pc x box
Hot Branded Products:
Shipping method and delivery time:
UK Shipping: No Tax, 2-4 working days arrive. For products marked " UK Ship " and UK local customer
EU shipping: No Tax, 5-7 working days arrive. For products marked " EU Ship " and from EU countries, if not belong to EU, need to clearance
Yodel/Royal Post/herems: No tax, around 5-7 days arrive . For products UK out of stock, and customers from UK
Yanwen: No Tax, 7-14 working days arrive, ship to all over the world, mainly for UK/EU warehouse no stock
DHL: Has Tax, need to clearance, 3-5 working days arrive. Used for UK/EU no stock, customers request ship this way. Need to clearance, we will declare a low price on the invoice help to clearance. If you have any questions about the device, the price, or the payment, please feel free to contact us.
Launch X-431 TSGUN to diagnose & program TPMS sensors for a Porsche Cayenne 2010
How to diagnose TPMS via X-431 TSGUN?
Problem: Porsche Cayenne owner complains that TPMS sometimes is not working.
Steps:
Having been selected car model, long press “OK” button and aim X-431 TSGUN at the tire pressure sensor.
There’s a trouble found: OEM sensor battery running low.
How to program TPMS sensors via X-431 TSGUN?
Place a new Launch RF Sensor near, X-431 TSGUN will identify it soon, press “Programming”.
Wait programming until 100%...
Note: please keep the device close to the tire pressure sensor that needs to be activated.
Succeed!
It’ ll show the sensor details on screen.
The operation is easy, just one-step to finish.
How to active new TPMS sensor via X-431 TSGUN?
After replacing the new RF Sensors into 4 tires.
Select TPMS function and correct car model.
Take X-431 TSGUN close to tire and long press “OK” button in turns.
All RF sensors are activated!
Test new sensors
Go back to diagnose TPMS system on X-431 scanner again. There’s no fault code found.
Test drive about 15 minutes. When sensor reading displaying on dashboard that means all done.